Category

Hot products

The wet-process fish feed extruder can be used to produce both floating fish feed and sinking fish feed. It is necessary to adjust the formula of fish feed for production. The output of the wet fish feed extruder is higher, and the wet fish feed extruder is equipped with a boiler, which can continuously supply hot steam to the screw during the fish feed production process, and the produced feed has higher maturity, smoother particles, and product quality. It is also better, and it is the first choice for large and medium-sized feed processing plants and farms. Wet fish feed extruders are also widely used in fish feed production lines.

Floating Fish Feed Extruder Machine

TYPE: Eletric fish feed extruder, Diesel fish feed extruder, Single screw fish feed extruder , Two screw fish feed extruder

Model: LM40, LM50, LM60, LM70, LM80, LM90, LM120,LM135

Capacity (kg/h): 40 – 2000kg/h

Finished Pellet Size: 0.4mm -15mm

Main Power (kw): 5.5 – 55kw

Application: Catfish feed, Tilapia feed , Tropical Fish feed, Shrimp feed, Cat food , Dog food, etc.

Fish Feed Making Machine

Model: LM40, LM50, LM60, LM70, LM80, LM90, LM120

Capacity (kg/h): 40 – 800kg/h
Type: electric-type dry-way

Finished Pellet Size: 0.8mm -12mm

Main Power (kw): 5.5 – 55kw

Application: Suitable for making Catfish feed, Tilapia feed, Tropical Fish feed, Shrimp feed, Cat food, Dog food, etc.

Diesel Engine Floating Fish Feed Extruder Machine

Capacity (kg/h)：40-400kg/h

Finished Pellet: 0.8mm – 12mm

Main Raw Materials: corn meal, wheat bran, soybean meal, rapeseed meal, and so on

Application: Catfish Feed, Tilapia Feed, Tropical Fish Feed, Shrimp Feed, Cat Food, Dog Food, etc.

180-4000kg/h Wet Way Floating Fish Feed Extruder Machine

Model：LM60 – LM200
Capacity (kg/h)：180 – 4000kg/h
Pellet Size：0.8 – 12mm
Main power (kw)：15 – 132kw
Feeder power (kw)：0.4 – 2.2kw
Screw Diameter (mm)：Φ60 – 200
Cutter power (kw)：0.4 – 3.0kw
Weight (kg)：480 – 4500kg

fish feeding timer machine cost

Floating fish feed procesing machine

This is a floating fish feed making machine, its working principle is that the fish feed raw material enters the screw extrusion cavity, Under the action of extrusion, friction and shearing between the rod and screw sleeves, the internal pressure and temperature are continuously increased, and the starch in the fish feed raw material will be gelatinized. When the fish feed raw material comes out of the discharge port, its pressure is suddenly released in an instant, the water also evaporates a lot, the temperature also drops instantly, the fish feed raw material expands and condenses immediately, and there are many micropores in the condensed colloidal material, forming an extruded feed. The continuously extruded columnar or sheet puffed products also need to be cut by a rotary cutter and then cooled, and sometimes post-processing procedures such as drying and spraying additives (such as oils, vitamins, etc.) are required.

Supplemental Feeding of Fish - Lake Management

Feeding can double the average size of harvestable fish and total pond production (up to about 600 pounds per acre). Fish can be fed throughout the warm months of the year, but best results are obtained by feeding from March through May and October through November when most bluegill growth occurs.